header-logo Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

Curve Flat Bar Ladder Pull Handle (Brushed Satin Finish)

SH-CFLH-S-24-4010
$130.00
Shipping:
Calculated at checkout
Quantity:
Share:

Strongar Hardware's modern curve flat bar stainless steel door handles are suitable for wood, glass and aluminum doors and come in multiple designs/finishes that range in length from 24 inches (small) to 32 inches (long/large). Highly-engineered materials and beautiful surface finishing allow for installation in outdoor environments such as gates, entry doors, shoplots to indoor environments such as boardrooms, shower glass doors, conference rooms, bathrooms and bedrooms.

Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required.

Center to Center Dimensions:

Total Length - 24 inches, Center-to-Center Mounting Distance - 18 inches 

Total Length - 32 inches, Center-to-Center Mounting Distance - 26 inches

Diameter or Cross-section Dimensions:  40|10mm or 1.57|0.39 inches (Front|Side).

Door Type: Mountable on all types of doors including but not limited to wood, glass and metal glass doors. 4 pairs of mounting bolts provided for different door types - (8 to 12mm), (35 to 45mm), (84mm & 120mm) for mounting up to 3.2 inch thick doors.

Material: High-endurance rust & corrosion proof stainless steel 304.

Instructions: Drill and create two thru holes between 0.315 - 0.600 inches (0.375 is recommended) on the door with a Center-to-Center Mounting Distance as specified above. Note that this is the theoretical distance and the actual distance may vary slightly so always measure the parts in hand for the actual distance.